China Zhengzhou Zhongyue Silicon Carbide Electric Heating Element Manufacturer
TEL：+86 13523030448
Email：xy9962@163.com
Relationship between service temperature and surface load of R element
Element using temperature and surface load
Design reference data of silicon carbide rod electric furnace
Silicon carbide furnace design data for reference
1. The center distance between the two rod piercing holes is 3-4 times the diameter of the rod end
The two rod threading hole between the center distance is 3-4 times the diameter of the rod end
2. The distance between furnace wall, heated object and element center shall not be less than the data in the table below
The fumace wall and the material to be heated and elementbetween the distance of not less the data in the table below
3. The perforation diameter of the furnace wall shall be 1.5 times the diameter of the rod used, and the gap shall be tightly blocked with asbestos wire.
The furnmace wall perforation should be used for 1.5 times the bardiameter,gap with asbestos line blocked strict.
Introduction of old process U-shaped silicon carbide rod
Tel：
